Issue 28
Read Next:

2 New Powersoft T Series Amplifiers

The company has announced two additions to the T Series family: the T902 and T904, two and four channel touring amplifiers.


15 June 2021

Powersoft announces two additions to its touring amplifier platform, the T Series, which will allow the company to almost entirely replace the well-established K Series.

Building on the K Series’ legacy, Powersoft introduced the T Series in 2019, hoping to define the ‘next generation specs’ for amplifiers in live sound applications, as well as setting new long-term benchmarks such as daisy-chained Ethernet connectivity, Dante audio networking, Power sharing, Improved DSP with powerful Advanced EQ groups, and FIR filtering for great sounding presets.

Now, in 2021, the new T902 and T904 have been introduced to extend the applications of the T Series even further, allowing it to cover the requirements for almost any system deployment, including larger scale live sound applications.

The T902 is a 2-channel amplifier specified to deliver 4000W at 2 Ohms, 3200W at 4 Ohms, or 1800W at 8 Ohms, and its high rail voltage and peak current on the outputs make it ideal for driving large 4-Ohm subwoofers (like dual 18’’) or 2- and 3-way line sources.

Thanks to the T902’s onboard DSP featuring Raised Cosine, IRR and FIR filters; and precision delay, the T902 is the perfect product for powering and controlling complex cardioid sub-woofer arrangements and complex 3-way line sources.

The other new addition to the T Series family is the 4-channel T904, which can deliver 1800W at 2 Ohms, 2000W at 4 Ohms, or 1600W at 8 Ohms. This new amplifier platform is designed to power Bi-amped systems like stage monitors, 2-way point source speakers, and 2-way line sources, as well as smaller sub woofers.

Much like the rest of the T Series family, the new T902 and T904 feature onboard DSP, in-built Dante inputs, and live impedance monitoring, as well as Powersoft’s Active DampingControl for cable resistance compensation.

“Most live sound amplifier families will feature lower voltages for smaller and lower cost products,” said Marc Kocks, manager of Powersoft’s Application Engineering team. “In smaller systems, however, it is quite common to have a single 8 Ohm loudspeaker per channel. This presented an opportunity for our development team to make a very homogenous amplifier range in which all models can deliver the same high output voltage, so that smaller models can also play ‘full SPL’ on 8-Ohm speakers.

“This makes the smaller models more affordable by saving in the power supply and output current capacity, while providing a solid feature set for the entire product family. With the addition of the T902 and T904 to the T-series it will be able to serve as a flexible and reliable workhorse for any live sound system.”

As Powersoft has been doing with its other launches over the last year, the new T Series amplifier platforms will be premiered in a series of live sessions that will take place at 9am (CEST), 3pm (CEST), and 8pm (CEST) on 22nd June 2021.

Register for the event here:

Australian Distributor:


Leave a Reply

Your email address will not be published. Required fields are marked *

More for you

Issue 28